Information  management  -  business-critical  applications  of  the  modern  enterprise
  ► Materials
  ► Equipments
  ► Tehnologies
  ► Information
  ► Contact us
  ► Home

 Site Search




 Information for builders

 The new articles

Protect the surface of the concrete floor
To protect the concrete floor, which is operated in the normal mode, or is subject to wear in areas with high traffic, there are several ways to protect the surface.
   Comparable ways: their cost, appearance and ability to perform the task to protect.
   In this article, we consider three ways to finish and protect the floor. Each of them has its advantages and disadvantages.
   Thin fil...

Finishing compositions based on water glass. Part 3
When used as part of exhaustion moderator comes coagulation and solidification of liquid glass. However, due to the presence in the composition of Portland cement with a finishing time is an increase strength of the coating due to hydration of cement minerals. Thus from colloids formed during the coagulation liquid glass are actively assigned to the water for hydration of cement, a porous media formed tumors filled Portland cement, which leads to...

Finishing compositions based on water glass. Part 2
Studies in Berlin Institute Federal institute for Materials Research and Testing, show that the average density of 1730 kg/m3 brick large proportion of pores having a size in excess of 1 micron is more than 90% [3] and they are responsible for the increased migration of fluids through brickwork.
   Most fully meet these requirements structure obtained by coagulation and water-soluble potassium silicate forming silica with a high sp...

Modernization and repair of self-propelled machines. (3)
Hardening electrolysis BORATING hinge pins and bushings mates working equipment hydraulic excavators EO-4121 (EA-4321) gives an increase in wear resistance 4-6 times compared to the bulk quenching details.
   Taking into account the high wear resistance of brazed blades, hardened sintered alloys (see Table 1), are recommended for carbide knives dumps graders DZ-122 and RS-98, combined machine E-405 based on KAMAZ, for front dumps a t...

Specialized exhibition Architecture. Construction (END)
Mari-lime brick and gas silicate blocks
   JSC "MZSK" produces silicate brick and a half, color (white, yellow, black, red, blue, green, brown).
   For the production of silica brick used quartz sand from quarries near the plant. Limestone enters the factory with Dobryatinskogo deposit Vladimir region. Silicate brick (Table 1) is used for masonry exterior and interior walls of buildings and structures, as well as ...

Geophysical processes primers and security. Part 5
In the center of Moscow can distinguish vertical structure comprising a crashing into the Earth`s crust magma elongated cylinder (Fig. 2) [5]. In the center section marked lack of extensive vertical zone converted waves ("blind spot"), going from the depths of 70-80 km to 7.5 km. Such "blind spots" are characteristic of the earth`s crust with the introduction of monolithic dense mantle rocks such as gabbro, diabase, etc. In such a zone Tashkent e...

Finishing compositions based on water glass. Part 1
The quality of the decoration of buildings for new construction and reconstruction depend not only on their aesthetic, but also the operational parameters, as good-quality finish - a guarantee of durable service basic designs, long maintenance-free operation, the costs for maintenance and care. Traditional binders used for the production of finishing compositions, liquid glass is widely used, but it has some drawback: coatings based on it gaining...

On possible amendments to the equation Griffiths
Griffith presented a picture of destruction allowed to formulate the problem of determining conditions of the beginning of crack propagation and find its general solution.
   As seen from the above schemes, in the process of crack propagation material directly adjacent to it "coasts" unloaded relaxes. This means that the stress and strain it decreases, and the elastic energy stored earlier in this area of ​​the body is re...

Construction skyscrapers - the requirements of modernity. Part 4
The program is a high-rise building in Moscow
   The project is now a high-rise building in Moscow is implemented in two main areas: the construction of business center "Moscow City" and implementation of the program of the Government of Moscow "New Ring of Russia."
   1. Moscow international business center "Moscow - City"
   The project includes the construction of buildings on the territory of abou...

Degree project - beginning of the road. (3)
Given the great diversity of subject matter and content of diplomas in various specialties, the jury is faced with great difficulties in determining the winners - "Who better violinist or a dancer?". Nevertheless, often based on emotional perception and can estimate the relevance and novelty, and the author`s contribution to the thesis project or job. Absolute winners in recent years have been graduates of Rostov CSO GASU St. Petersburg, Nizhny N...


 Information for builders



 Information  management  -  business-critical  applications  of  the  modern  enterprise

Modern manufacturers market dictates strict conditions: steadily increasing demands on product quality, reduce its cost, reduced manufacturing terms. Personalisation orders causes frequent change of the product range, for operational management owners and managers must possess full information about the activities of each business unit.
   Of course, the company is able to operate effectively only when the maximum reduced time and cost of pre-production to production demanded by the market. However, even automation jobs designers and engineers did not always produce the desired result. This is explained by the fact that the pre-production complex, high-tech products - team process, and without a clear organization of interaction of all professionals to achieve the desired result is very problematic.
   Emerging problems are solvable if within the company (or group of companies) created a single information space, which contains all the data on corporate products. For the formation of such an interactive environment and is designed COMPASS system V6, developed at ASCON.
   COMPASS V6 software package provides a structured electronic product description, integrating all the information that can be used across the extended enterprise, including suppliers and service organizations. Specialists can use any product data and obtain information about any configuration changes on planned and actual resources, the conceptual design. Thus, being a powerful business resource system actually accompanies all stages of production, including visualization of the assembly, distribution and support. COMPASS is a definite plus V6 - the ability to quickly exchange information with other software CAD used by the customer.
   "Brainstorming" center complex COMPASS V6 - system software lifecycle LOTSMAN: PLM, which keep the technical documentation for the product, manages the process of its development, information on the structure and configuration options. PILOT: PLM ensures high-performance work while connecting any number of users with access rights to the site-specific demarcated.
   Three-tier system, and includes a database server (single repository of all information) application server, through which information is processed, the client module that provides user access to the required database.
   PILOT: PLM contains all the information needed to design, manufacture and operation of the product engineering enterprise. In the preparation stage accumulates data on the results of design and technological design and exchanges of information between engineering services. The system is tightly integrated with a single reference database has high scalability and fault tolerance.
   To be continued.